GIGABYTE MB Sc LGA1151 H310TN (rev. 1.0), Intel H310, 1xDDR4, VGA, thin mini-ITX

1. Support for 8th Generation Intel Core™ i7 processors/Intel Core™ i5 processors/Intel Core™ i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1151 package
2. L3 cache varies with CPU

(Please refer „CPU Support List“ for more information.)

1. Intel H310 Express Chipset

1. 1 x DDR4 SO-DIMM sockets supporting up to 16 GB of system memory
2. Support for DDR4 2400/2133 MHz memory modules
3. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
4. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

(Please refer „Memory Support List“ for more information.)

1. 1 x D-Sub port, supporting a maximum resolution of 1920×1200@60 Hz
2. 1 x HDMI port, supporting a maximum resolution of 4096×2160@30 Hz
   * Support for HDMI 1.4 version and HDCP 2.2.

Maximum shared memory of 1 GB

1. 1 x M.2 Socket 1 connector for an Intel CNVi wireless module only (CNVI)

1. 1 x M.2 connector (Socket 3, M key, type 2260/2280 SATA and PCIe x4/x2 SSD support) (M2A)
2. 2 x SATA 6Gb/s connectors

1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
2. 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

1. Realtek ALC887 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel

1. Realtek GbE LAN chips (10/100/1000 Mbit)

1. Infineon chip, supporting TPM 2.0

1. 1 x DC-In power connector
2. 2 x USB 2.0/1.1 ports
3. 2 x USB 3.0/2.0 ports
4. 1 x RJ-45 port
5. 1 x HDMI port
6. 1 x D-Sub port
7. 2 x audio jacks

1. 1 x 4-pin ATX 12V power connector
2. 1 x CPU fan header
3. 1 x system fan header
4. 2 x SATA 6Gb/s connectors
5. 1 x SATA power connector
6. 1 x front panel header
7. 1 x front panel audio header
8. 1 x battery power cable connector
9. 1 x USB 3.0/2.0 header
10. 1 x USB 2.0/1.1 header
11. 2 x serial port headers
12. 1 x LVDS header
13. 1 x LVDS drive voltage jumper (LCD_VCC)
14. 1 x flat panel display header (FPD)
15. 1 x flat panel display power jumper (FPD_PWR)
16. 1 x speaker header (SPKR)
17. 1 x buzzer header (SPEAKER)
18. 1 x Clear CMOS jumper
19. 1 x chassis intrusion header

1. iTE I/O Controller Chip

1. Voltage detection
2. Temperature detection
3. Fan speed detection
4. Overheating warning
5. Fan fail warning
6. Fan speed control
   * Whether the fan speed control function is supported will depend on the cooler you install.

1. 1 x 128 Mbit flash
2. Use of licensed AMI UEFI BIOS
3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

1. Support for @BIOS
2. Support for Q-Flash

1. Norton Internet Security (OEM version)

1. Support for Windows 10 64-bit

1. Thin Mini-ITX Form Factor; 17.0cm x 17.0cm