MikroTik PL7411-2nD - PWR-LINE AP, EU plug

The PWR-LINE AP is a wireless access point with a single Ethernet port, a built-in 802.11b/g/n WiFi radio and capability to connect to other PWR-LINE devices through the electrical lines in your premises.

Since the device runs the same software as all other MikroTik products, it opens up a wide array of functions, all made possible with the extensive feature set present in RouterOS.
You either use the default configuration, which allows hassle free and quick installation, or dive into the rich configuration options, set firewall, usage limitations, make virtual access points for guests and more. When using multiple PWR Line AP devices in your network, you can even manage them all with the CAPsMAN access point manager feature, which can be run on your main MikroTik router

Product code PL7411-2nD
CPU QCA9533
CPU nominal frequency 650 MHz
PLC chipset AR7420
Size of RAM 64 MB
Memory 16 MB Flash
10/100 Ethernet ports 1
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
Wireless regulations Specific frequency range may be limited by country regulations
Antenna gain 1.5 dBi

RATE Tx (dBm) Rx (dBm)
1MBit/s 22 -96
11MBit/s 22 -89
6MBit/s 20 -93
54MBit/s 18 -74
MCS0 20 -93
MCS7 16 -71
Antenna beam width 360°
Wireless chip model QCA9533
Supported input voltage 100 V – 240 V
Dimensions 50 x 68 x 33mm
Operating temperature -20°C .. +60°C
License level 4
Operating system RouterOS
Max power consumption 7 W
Power plug type Type C (commonly used in Europe, South America and Asia)